SLTflex Ceramic lamellar flap disc

The flexible SLTflex flap discs from LUKAS for machining hard-to-reach areas are the improved alternative to grinding discs or conventional lamellar flap discs. The small resin core of the backing plate and its practical M14 thread allows for a larger flap projection. This makes the disc flexible, it can adapt itself to uneven surfaces, and requires little effort in use. With its long tool life, it is ideally suitable for fillet weld grinding. There is no risk of the workpiece being damaged by the back plate. Compared to grinding discs, the LUKAS patented flap shape and arrangement gives 50% lower noise levels, less vibration, faster operation, greater efficiency and better surface results. The flat orientation of the abrasive flaps not only makes for safer working, but also reduces tool wear. A particularly large concentration of abrasive grains on the outer perimeter results in an exceptionally high stock removal rate per minute. Due to its multi-layered abrasive coating, the SLTflex Ceramic lamellar flap disc is always as sharp as when it was first used: when the upper flaps wear out, fresh abrasive coating from the flaps underneath is exposed. This ensures a long service life and consistent work quality. Thanks to the self-sharpening effect of the innovative ceramic abrasive grain, it also remains optimally sharp at all times. Ceramic particles break off during use, making room for new ones with sharp cutting edges. Tool changes are required much less frequently - reducing tool costs.